Customized ABS Electric Bed For Hospital Multi Functional Sickbed
Before using this product, please read this product manual in
detail, and operate and use it in strict accordance with the
regulations in this product manual.
1. Product introduction
The medical five-function electric hospital bed is mainly composed
of a bed panel, a bed frame, a head and foot board, a guardrail, a
motor, and a transmission system; the bed surface is made of
high-quality steel spray-painted bed surface, and the bed frame and
foot are made of rigid steel, which is beautiful durable.
The medical electric hospital bed adopts motor drive to realize the
adjustment of the bed posture, which is safe and reliable; the head
and foot board are clean and beautiful, free to load and unload,
and easy to clean. It is equipped with a locking device to ensure a
tight connection with the bed.
This product is suitable for use in general wards of hospitals,
medical examinations and home care.
2. Product image
①Headboard ②Guardrail ③Bed panel ④Foot board
⑤Universal casters ⑥Operation screen ⑦Shoe rack
3. Main technical parameters
| Project | Technical parameters |
| Size | 215*97*50cm |
| Back-rest adjustable | 0°～ 75°±5° |
| Knee-rest adjustable | 0°～ 45°±5° |
| Body-lifting adjustable | 46°~72°±5° |
| Reverse Trendelenburg | 0°~ 15°±5 |
| Brake mode | Central control brake |
4. Installation and use method
Before using this product, check whether its appearance is smooth,
whether the components are complete, and whether the installation
and coordination of the components are effective. When using, the
appropriate strength should be mastered according to the
requirements of the product.
1. After assembling the bed and the bed frame, they should be fixed
firmly, and there should be no loose or sliding phenomenon;
2. Hang the connecting pendant of the head and foot board on the
connecting pin of the bed, and lock it with the locking device to
make the two connect reliably;
3. Before use, check whether the fastening parts are loose, and if
there is any looseness, they should be properly tightened;
4. After the bed is installed, the brake should be stepped on; the
brake should be released before moving the bed to prevent damage to
the casters;
5. Operate the electric handle indicating button to raise or lower
the back frame, foot frame, bed board, left and right, etc.; the
handle should be hung back to the top of the guardrail after use to
avoid bruising.
6. When adjusting the angle of the bed surface, avoid people other
than the patient sitting on the bed, so that the bed can work
within a reasonable load range.
7. When selecting and using the guardrail, hold the tail of the
guardrail with your hand, and then pull it toward the end of the
bed, the guardrail will be erected; Will accept it.
5. Packing list
| Serial | name | unit | quantity |
| 1 | Medical bed | piece | 1 |
| 2 | Product manual | piece | 1 |
| 3 | Certificate of conformity | piece | 1 |
| 4 | ABS damping table board | piece | 1 |
6. Matters needing attention and maintenance
1. The hospital bed has been strictly tested before leaving the
factory, please do not disassemble, assemble or disassemble by
yourself.
2. The hospital bed can be cleaned with a soft, clean cloth, or 75%
isopropyl alcohol aqueous solution can be used to obtain a better
cleaning effect.
3. The hospital bed should be stored in a dry, non-corrosive gas
and well-ventilated environment, and avoid direct sunlight.
4. All parts of the hospital bed should be kept clean.
5. If the fault occurs, it should be repaired by professionals.
When the company provides services, please contact the dealer or
the company's after-sales service department in time. Do not
disassemble and repair at will.
